The Bar Council of India and the University Grants Commission both recognise the three-year professional undergraduate degree programme known as a Bachelor’s in Law and Legislation or LLB. The comprehensive three-year law curriculum will prepare you for a demanding and enriching career in various legal professions.
The LLB curriculum emphasises law but expands the existing knowledge and interests that students already have from their undergraduate degrees in fields other than law by providing a broad range of electives that enable the autonomous pursuit of interests. BML Munjal University (BMU) students will benefit greatly from an interdisciplinary atmosphere with a broad spectrum of electives and honours papers infused with the accumulated knowledge and expertise of the Law School, School of Management, School of Economics & Commerce, and School of Engineering and Technology.
Traditionally, the law has been perceived as an independent discipline with different methods and styles. At BMU, we upend this tradition by promoting collaboration between different streams of knowledge. Expert faculty from the School of Management and the School of Engineering & Technology regularly engage with students at the School of Law through lectures, events, and open discussions.
To apply for LLB, click here
Applicants are required to undergo the following process:
Note:
Internal Referral Programme:
Referral candidates who are brothers and sisters (not cousins) of either BMU Alumni or of students presently pursuing a UG/PG programme at BMU shall be granted a waiver of 25% on the first-year tuition fee.
BMU’s Admissions Committee considers academic performance and the student’s context to understand each individual’s journey and their potential to grow and contribute as a member of the diverse community at BMU.
Candidates are advised to appear for BMU-SAT in case results of tests have not been announced or are not available.
Application Cycle | Applications Start | Applications Close |
---|---|---|
Early Admission | Monday, March 14, 2022 | Friday, April 29, 2022 |
Regular Admission | Saturday, May 2, 2022 | To be announced* |
Note:
Applications for a cycle must be submitted by midnight of the relevant date.
Dates may be changed or updated based on exam schedules, announcement of test scores and other considerations at the discretion of BMU. Students are advised to regularly update themselves on applicable timelines.
Curriculum
Read MoreBML Munjal University follows Scholarship and Financial Grants policies designed to support the education of the meritorious, and equally, those who are most needy. Our policies foster a culture of diversity and inclusion that acknowledges the unique strengths of different individuals. The Scholarship & Financial Grants Policy covers the following categories of grants:
Merit Scholarships, within which BMU provides two categories of Scholarships:
Students will receive a Scholarship equivalent to 100% & 75% of the Tuition Fee in the first year
Students will receive a Scholarship equivalent to 50% & 25% of the Tuition Fee in the first year
The grant of scholarships will be based on merit on any one of the following criteria on a first-come first served basis.
Read MoreThe pattern for online entrance test shall be in the form of two parts as defined below:
The aim of Automation course is to demonstrate how PLC controls communicate with the machines by user defined programs and monitor/control the whole process by means of HMI and SCADA. This lab is equipped with 6 S7-1200 PLCs and 1 S7-1500 PLC with KTP HMI-700 Basic and SCADA system and used to train the trainees about the different hardware arrangements of PLC, application of PLC, HMI and SCADA and the process to program a PLC using different programming languages. PLC has a wide variety of applications in manufacturing industry to automate the conventional arrangement in to automated systems it make ease for manufacturing industry.
The aim of the Mechatronics course is to apply the fundamentals and principle of mechanical, electronics and computer engineering for the integration of automated systems for the ease of production industry. The lab is equipped with two sets of 5-station Industrial application prototypes for understating the application of mechatronic concept. These are used to provide the training on basic concepts and implementation of computers, electronics, mechanical drives and systems, programmable logic controllers, sensors and transducers, hydraulic, pneumatic and electric drives design of mechanical structure and mechanism.
To support faculty in research in Materials Science and Engineering, BMU has created an advanced research facility named the “Center for Advanced Materials and Devices”.
It is equipped with several scientific instruments that are available in some of the renowned universities/ IITs/ Institutes in India. The Center is broadly classified into three research facilities:
This facility generates the capability to design a product and validate the design by automating the process of designing, drawing and analysing with digital tools and curriculum prepared by renowned professionals from SIEMENS PLM. Students can learn and perfect the engineering of conceptualizing and designing a new product right from the scratch and validate it using FEA. The following softwares are installed:
The aim of Automation course is to demonstrate how PLC controls communicate with the machines by user defined programs and monitor/control the whole process by means of HMI and SCADA. This lab is equipped with 6 S7-1200 PLCs and 1 S7-1500 PLC with KTP HMI-700 Basic and SCADA system and used to train the trainees about the different hardware arrangements of PLC, application of PLC, HMI and SCADA and the process to program a PLC using different programming languages. PLC has a wide variety of applications in manufacturing industry to automate the conventional arrangement in to automated systems it make ease for manufacturing industry.
This lab is used to train how to apply the fundamentals and principle of machining, part programming, tooling and production technology for the integration of automated systems for the ease of production industry. The centre has real time CNC controller to provide the training on CNC Turning and Milling. Lab is equipped with two CNC turning kits and 2 CNC Milling Kits and 1 replica of VMC in which trainees use to prepare the coding for the product design and also use SINUMERIC software for virtual training practice.
Pneumatic solutions are increasingly used in all branches of industry and it is also used in the development of automation solutions. This lab has a set of sophisticated Pneumatic/Hydraulics, Electro-Pneumatic and Hydraulics equipment which is used to impart fundamental training, including on the process of designing pneumatic and hydraulic circuits on kit and on Fluid Sim software.
The aim of the Mechatronics course is to apply the fundamentals and principle of mechanical, electronics and computer engineering for the integration of automated systems for the ease of production industry. The lab is equipped with two sets of 5-station Industrial application prototypes for understating the application of mechatronic concept. These are used to provide the training on basic concepts and implementation of computers, electronics, mechanical drives and systems, programmable logic controllers, sensors and transducers, hydraulic, pneumatic and electric drives design of mechanical structure and mechanism.
The Centre is equipped with standard training cells comprising of KUKA (a German manufacturer of industrial robots and solutions for factory automation) KRC-4 industrial robot with required auxiliary equipment. This training cell is capable of performing multitude of operations used for Arc welding, Material handling and Spot welding and other essential operations used by the automobile, food and beverages, packaging and other manufacturing and production industries.
The Centre is equipped with standard training cells comprising of KUKA (a German manufacturer of industrial robots and solutions for factory automation) KRC-4 industrial robot with required auxiliary equipment. This training cell is capable of performing multitude of operations used for Arc welding, Material handling and Spot welding and other essential operations used by the automobile, food and beverages, packaging and other manufacturing and production industries.
The objective of BMU CoE is to develop/enhance the technical skills and competence of the trainees (Engg. Grad. /Under Grad., ITI, Diploma and Industry people) which leads them to enlarge their area of employment opportunity and career in the field of modern industry The Centre is equipped with several scientific instruments that are available otherwise only in some of the renowned institutions of technical learning in India. The Centre is broadly classified into eight facilities:
This lab is designed to enable maintenance personnel to carry out commissioning, calibration and maintenance of the typical devices used for measurements and control in industrial systems. These are equipped with 2 types of industrial Pressure sensor, 3 types of Level sensor, Temperature sensor, 3 types of flow sensor and control valves with smart positioner and PCS7.
These are used to skill the trainees on how to program, calibrate and monitor the sensors using HART and Profibus modules. PCS-7 is used to instruct trainees on how to communicate and program the different industrial sensors and process control equipment and design the SCADA system to monitor and control the process.